Important details of KTV audio engineering decoration design
2024-06-06
The so-called details determine success or failure. The problems in KTV audio decoration design are very complicated, involving architecture, acoustics, ventilation, audio, lighting, video and so on. The decoration styles of various countries and regions have their own merits, but there are many problems. Therefore, special attention should be paid to the decoration of KTV, and starting from the details can leave no regrets. Do you know these important details?
Audio-the "soul" of box decoration
Audio is the absolute "soul figure" in the decoration of the entire box. When installing the audio, we need to consider not only its brand quality, but also its location. Because to a large extent, the location of the audio determines the final effect of the audio.
1. The omitted size
The rods for hanging the audio equipped by the audio manufacturer are generally the same size, and the decoration company often does not consider the different designs of each KTV box when installing the audio. This involves another situation. If there is a background wall in your box, the general thickness of the background wall is 35mm on average, but the sound box is not a flat object, but a three-dimensional front and back. When there is not enough distance between the speaker and the wall, it cannot be installed. If the sound supplier and the decoration team fail to communicate this issue in time before the decoration, the consequences will be very troublesome. All the hanging rods must be removed and re-drilled.
The sound can only be used to the maximum extent when it is hung at the correct and appropriate angle. The more popular installation method now is to place all 4 speakers in the front of the private room according to the level and different angles.
2. How to hang the speakers
Stand at the middle point in the private room, with the place where you stand as the center, and extend like the speakers on both sides. The diagonal is about 45°, which is the best position.
In addition, please note that the speakers should be able to rotate 360° left and right after hanging. In this way, any angle setting can be adjusted in future use.
3. Microphone
There are many types of microphones, and different types of microphones are needed in different occasions. As far as KTV is concerned, it is recommended that you buy the parts of the microphone and assemble it yourself. The price of the finished microphone is relatively expensive, ranging from several hundred yuan, and it is also difficult to repair. The microphone is also a high-consumption product, and the cost performance is really not high.
The price of a self-assembled microphone is only a few dozen yuan, and the highest price is less than 100 yuan. If the parts are broken, you can just replace them with new ones. The microphone head is the most important, and the general price is about 50-100 yuan. It is recommended to buy medium-to-high-end ones. The shell can be customized by the manufacturer according to your own requirements for length and size, which is more affordable. The audio cable of the microphone can also be bought on the market, and the connector can be welded by yourself for easy replacement. A roll of wire is 200 meters, and an average of 4.5 meters.
For more professional knowledge about KTV and KTV audio, please continue to pay attention to Guangzhou Sanchuan Audio!
Previous Page:
2024 /
06-06
Classification:
Industry News
RELATED INFORMATION
HOTLINE
Tel: 86-020-34889968
Fax: 86-020-34886628
E-mail:songtrend@163.com
Address: Building A11, Huachuang Animation Industrial Park, Panyu, Guangzhou
WeChat official account
