m@meye.com En 中文
HOME > Products > Line Arrays Systems
product

GR-15

Model : GR-15
Trequncy Response  :  55Hz-18KHz±3dB
Power Handling  :  550W(RMS)2200W(PEAK)    
Sensitivity  :  100dB(1W@1M)”
Max SPL  :  127dB(PEAK) 
Drivers  :  LF:1x15”(385mm)woofet 75mm(3in) coil
  HF: 1x2.5”compression driver with 65mm titanium diaphragm
Nominal impedance 阻抗 8 ohm
Coverage  :  80°Hx50°V
Connections  :  1(+)1(-)   
Connectiors  :  2xNL4MP  
Enclosure  :  Birch Plywood
Finish  :  Emery Paint/Textured Paint(可选择)
Dimensions  :  439x700x470mm(W x H x D )  
Packing Dimensions  :  520x500x765mm(W x H x D)
Net Weight  : 29kg/只
Gross weight  :  32kg/只

product detail

The GR-15 is a passive two-way full-range speaker system suitable for fixed installations in a wide spectrum. Its compact size, clear sound quality, and low distortion make it ideal for modern religious venues, music and dance clubs, theaters, and speech reinforcement. The design of the GR-15 trapezoid enables it to be combined like a unit to form a powerful array. The 80 ° x 50 ° orientation makes the GR-15 suitable for applications that require accurate and controlled coverage, such as acoustically reflective rooms, especially for longer locations. With M8 threaded suspension points and a range of MEYE's optional hardware, the cabinet can be suspended or installed with third-party installation equipment. GR-15 provides extended high frequency response, low distortion output, impactful bass and precise pointing control. It also has a well-designed frequency divider that passes through the intermediate frequency region to provide a flat sound power response. In addition, there is a MEYE special PET full-frequency drive protection circuit. The GR-15 is a multifunctional speaker that can be used for High-quality, high-power sound reinforcement music and speech applications at an affordable price.
The speaker system is a two-way full-frequency, trapezoidal, and open-hole low-frequency design. It has a 15-inch low-frequency cone driver and a 1.4-inch horn high-frequency driver, and the drivers are installed on the 80 ° H x 50 ° V horn. . There is also an NL4-compatible locking connector that runs parallel to the terminal block. The speaker cabinet is made of 18mm, 11-layer staggered birch and steel perforated mesh cover, and has 14 M8 suspension / installation insertion points.